Birbeck, Smiley, Stowell & Newman-Sanders (2018)
“Engineering design of the platform edge screens for the Elizabeth line’s tunnel stations.” The Structural Engineer, Volume 96, Issue 7, pages 84–89. First published 2 July 2018.
Crossrail Learning Legacy ↗
WHAT THE PAPER COVERS
What is a platform edge screen?
In this paper, a platform edge screen is the complete assembly: sliding screen doors, an upper service wall for lighting and communications, and a smoke-extraction duct over the track.
The complete PES assembly — Learning Legacy PDF ↗
TAXONOMY
Three platform-edge structures
Platform edge doors
Balustrade-height barriers used primarily for safety.
Platform screen doors
Doorway-height screens providing safety and some separation from platform air movement.
Platform edge screens
A platform-to-ceiling assembly that separates the platform and track environments.
The authors note that platform edge structures were first used in the UK on the Jubilee line extension in 1999.
Door taxonomy and UK history — Learning Legacy PDF ↗
SCALE
More than 2.5 km of screen frames
The study covers Bond Street, Tottenham Court Road, Farringdon, Liverpool Street and Whitechapel. It does not cover basement-box stations such as Paddington or Canary Wharf. Each station has over 0.5 km of screen, with more than 2.5 km of frames across the five stations on a 3 m module—over 830 modules.
Covered stations and scale — Learning Legacy PDF ↗
Nine-car Elizabeth line trains are over 200 m long, and platforms were finished at 250 m with 5 m of unobstructed headroom.
Train and platform dimensions — Learning Legacy PDF ↗
VENTILATION
A PES can change station planning
The full-height screen effectively eliminated air leakage through the stations and removed the need for six additional ventilation shafts and head-houses in central London. The extraction duct was placed over the track, leaving the vertical screen face available for lighting, signage and services.
Ventilation and duct arrangement — Learning Legacy PDF ↗
ROLLING STOCK
Designed before the trains were chosen
Rolling stock had not been ordered during initial design and tunnel construction. Competing bids had different door layouts, while the final frame had to accommodate longer trains and changed configurations.
Mixed-fleet design conditions — Learning Legacy PDF ↗
The hybrid solution was temporarily hung from crown fixings at 3 m centres during fit-out, then permanently propped from the platform on pin-ended posts that could be placed to suit the eventual door positions. A continuous Vierendeel truss on a 1.5 m module and 15 m movement joints maintained flexibility; a fallback hanging path remained if a post was lost.
Frame, truss and movement-joint strategy — Learning Legacy PDF ↗
STRUCTURAL LESSONS
Fatigue, fire and electrical isolation
Reversing piston pressures from passing trains are typically 0.8 kN/m², with a 1.2 kN/m² extreme. Trains every two minutes produced over 24 million fatigue cycles in a 120-year design life, governing welded connections.
Pressure and fatigue design — Learning Legacy PDF ↗
The PES was not intended to resist a full train fire, but had to withstand smoke at 200°C for up to one hour for a small baggage fire. Screen doors and adjacent posts were electrically isolated from the frame and platform rebar because a stopped train could float at roughly 50 V relative to the station.
Fire and electrical-isolation requirements — Learning Legacy PDF ↗
REFERENCE DESIGN
Shared design, station-by-station delivery
Atkins, Grimshaw, GIA Equation and Maynard developed the screens as a shared C100 reference design. The design was prototyped and tested before it was issued to each station contractor.
IStructE project account ↗
Lessons for Toronto
The Elizabeth line case shows why platform protection can be addressed as part of station ventilation and train-fleet planning, not only as a line of door panels. Its modular and mixed-fleet provisions are especially relevant to TTC retrofit and rolling-stock compatibility decisions.
Compare platform-door types in Platform Doors 101 ↗